Panasonic AG-AC160AEN - Manual (Page 91)

91
Menu
[TC/UB SETUP] screen
Item
Display
mode
Description of settings
[TC MODE] Selects the correction mode of the internal time code when the time code of the
internal time code generator is recorded.
[DF]: Uses the drop frame mode.
[NDF]: Uses the non-drop frame mode.
• Automatically set to [NDF] when you set the recording frame rate of the
recording format to 24P.
• Enabled only when [SYSTEM FREQ] = [59.94Hz].
[TCG] Sets the mode in which you advance the internal time code generator.
[FREE RUN]: The time code is advanced regardless of the operation mode. A
slight time error may occur when switching to mode if the
frame rate is set to 24P.
[REC RUN]: The time code is advanced when shooting.
[TC PRESET] Sets the initial time code.
When you set the frame rate of the recording format to 24P, set the frame value
to 0 or a multiple of 4 in AVCHD mode and to 5 frame units in DV mode. If any
other value is set, the recorded time code will mismatch.
[YES] [NO]
[UB MODE]
(DV mode
only)
Sets the content to be recorded as the user information.
[USER]:
Records the user information.
[TIME]: The time is recorded.
[DATE]: The date and time are recorded.
[TCG]: Records the value of the time code generator.
[FRAME RATE]: Records the frame rate information of frame conversion.
[UB PRESET] Sets the user information.
[YES] [NO]
[EXT TC LINK] Synchronizes the initial time code value during multi-camera shooting. ([SLAVE]
camera time codes are synchronized to the [MASTER] internal [TCG] value.)
[MASTER]:
Sets the mode to master mode.
[SLAVE]: Sets the mode to slave mode. When the
button is pressed, input time codes are synchronized to the
internal [TCG].
[NO]: Returns to the previous screen.
• [MASTER] and [SLAVE] mode settings are in effect only when this menu is
open. When the menu is closed, [EXT TC LINK] is automatically canceled.
is the factory default mode.