Specifications, General, Input – Panasonic WJ-HD100 User Manual
Page 42: Output, Serial interface, Alarm function, Standard accessories
43
SPECIFICATIONS
General
Required Power:
120 V AC 60 Hz
Power Consumption:
24 W
Operating Temperature:
+5 °C to +45 °C (41 °F to 113 °F)
Dimensions:
420 mm (W) x 44 mm (H) x 350 mm (D), excluding rubber feet
16-9/16” x 1-3/4” x 13-13/16”
Weight:
5.2 k
g (2.4 lbs)
Input
Video Input:
Composite video or data multiplexed, 1 V[p-p], 75
Ω
auto-termination, BNC
Audio Input:
–10 dBV, 10 k
Ω
, unbalanced, RCA pinjack
Alarm Input:
Non-voltage make contact, 100 ms or longer, terminal
Alarm Reset Input:
Non-voltage make contact, 100 ms or longer, terminal
Time Adjust Input:
Non-voltage make contact, 100 ms or longer, terminal
Series Recording Input:
Non-voltage make contact, 100 ms or longer, terminal
Alarm Recall Input:
Non-voltage make contact, 100 ms or longer, terminal
Remote
Control
Input:
REC, PLAY, STOP (SETUP), REW/FF, STEP, ALARM SEARCH, JOG-RIGHT,
JOG-LEFT, JOG-CLICK (EXT REC): Non-voltage make contact, 100 ms or longer,
terminal
Output
Monitor Output:
Composite video, 1 V[p-p], 75
Ω
, BNC
Video Output:
Looped through, BNC
Audio Output:
–10 dBV, 600
Ω
, unbalanced, RCA pinjack
Camera Switching Output:
Open-collector, MAX 12 V DC 100 mA, RCA pinjack
Alarm Output:
Low-active (open-collector, MAX 24 V DC 100 mA)/High-active (12 V DC, 220
Ω
)
switchable, terminal
Alarm Recover Output:
Low-active (open-collector, MAX 24 V DC 100 mA)/hi-active (5 V DC, 220
Ω
)
switchable, terminal
Recording Status Output:
Open-collector, MAX 24 V DC 100 mA, terminal
Playback Status Output:
Open-collector, MAX 24 V DC 100 mA, terminal
Time Adjust Output:
Open-collector, MAX 24 V DC 100 mA, terminal
Disk End Status Output:
Open-collector, MAX 24 V DC 100 mA, terminal
Auto OFF Output:
Open-collector, MAX 24 V DC 100 mA, terminal
Series Recording Output:
Open-collector, MAX 24 V DC 100 mA, terminal
Serial Interface
RS-232C:
9-pin D-Sub
RS-485:
PS
•
Data protocol, Modular-6
Alarm Function
Alarm Buzzer:
ON/OFF
Alarm Reset:
Auto reset/manual reset
Alarm Suspension:
ON/OFF
Button Lock Buzzer:
ON/OFF
Standard Accessories
Rack Mounting Bracket:
2 pcs
Fixing Screw (M3x10):
6 pcs
Dimensions and weight are approximate.
Specifications are subject to change without notice.