beautypg.com

Paradyne HOTWIREt 7984 User Manual

Page 83

background image

Configuration Option Tables

A-3

7984-A2-GB20-10

February 1999

Table A-1.

Network Interface Options (2 of 2)

DSL Line Rate

Possible Settings: 400, 528, 784, 1040, 1552
Default Setting: 1552

Determines the fixed line rate of the LTU, in kbps.

H

DSL Line Rate is only available when the unit is configured as an LTU, and
AutoRate is set to Disable.

400 to 1552 – The fixed DSL Line Rate, in kbps.

Peer IP Address (LTU Only)

Possible Settings: 000.000.000.001 – 223.255.255.255, Clear
Default Setting: 000.000.000.001

Specifies the peer IP address for the NTU, to provide remote management providing the
remote management link on the DSL loop.

H

Peer IP Address is only available when the standalone unit is configured as an
LTU.

Address Field(000.000.000.001 – 223.255.255.255) – Enter an address for the peer
unit. The range for the first byte is 000 to 223, with the exception of 127. The range for
the remaining three bytes is 000 to 255.

Clear – Clears the IP address field and sets to all zeros.

Circuit Identifier

Possible Settings: [ASCII Text], Clear
Default Setting: [blank]

Uniquely identifies the circuit number of the transmission vendor’s DSL line for
troubleshooting purposes.

[ASCII Text] – Enter a maximum of 128 characters. All printable ASCII characters
except ^ (caret) are allowed.

Clear – Clears the field.