Running network tests – Paradyne HOTWIREt 7984 User Manual

Page 58

Testing

5-2

7984-A2-GB20-10

February 1999

Running Network Tests

Network tests require the participation of your network service provider. To
access the Network Tests screen, follow this menu selection sequence:

Main Menu

→

Test

→

Network & DSX Tests

ООООООООООООООООООООООООО

main/test/network_DSX

Hotwire

Model: 7974

NETWORK & DSX TESTS

Test

Command Status Results

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Local Loopbacks

Line Loopback:

Start Inactive

00:00:00

Payload Loopback:

Start Inactive

00:00:00

Repeater Loopback:

Start Inactive

00:00:00

DTE Loopback:

Start Inactive

00:00:00

Remote Loopbacks

Send Line Loopback: Down

Send Inactive

00:00:00

Pattern Tests

Send and Monitor 511

Stop Active hh:mm:ss - Errors 99999+

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

ResetMon

Use the Command column to start or stop a test. When the Status column
shows that a test is Inactive, Start is displayed; when a test is Active, Stop is
displayed. Position the cursor at the desired Start or Stop command and press
Enter.

Selecting Abort All Tests from the Test menu will not disrupt a send and monitor
511 test.

The Results column displays the test duration.

When the Send and Monitor 511 test is active, ResetMon is available to reset the
error counter to zero.