Paradyne HOTWIREt 7984 - Manual (Page 38)

Initial Startup and Configuration
3-12 7984-A2-GB20-10 February 1999
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded. To access the Configuration Edit/Display screen,
follow this menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
– or –
Main Menu
→
Configuration
→
Default Factory Configuration
О
О
ОО
ОО
main/config/edit Hotwire
Model: 7984
CONFIGURATION EDIT/DISPLAY
Network
DSX-1
System Options
Communication Port
Management and Communication
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
See Appendix A, Configuration Option Tables , for a list and explanation of the
configuration options available.
Select . . . To Access the . . . To Configure the . . .
Network Network Interface Options , Table A-1 DSL network interface on
the unit.
DSX-1 DSX-1 Interface Options , Table A-2 DSX interface.
System
Options System Options , Table A-3 General system options of
the unit.
Communication
Port Communication Port Options , Table A-4 Unit’s COM port options.
Management
and
Communication H Telnet Session Options , Table A-5
H Communication Protocol Options ,
Table A-6
H General SNMP Management
Options
, Table A-7
H SNMP NMS Security Options ,
Table A-8
H SNMP Traps Options , Table A-9
Management support of the
unit through SNMP and
Telnet.