Paradyne HOTWIREt 7984 - Manual (Page 13)

About the Hotwire 7984 Standalone Termination Unit
1-3 7984-A2-GB20-10 February 1999
Network Configuration
Figure 1-1 shows several configurations including a network application using a
2-port Hotwire 8784 M/HDSL Termination Unit in a central office (CO). In this
configuration, a frame relay switch and a router are connected, through the
termination unit, to partner units supporting a host or router, and frame relay
encapsulated or unframed data.
This figure also shows a standalone-to-standalone configuration using either
another Hotwire 7984 M/HDSL standalone unit with a DSX-1 interface or a
Hotwire 7985 M/HDSL standalone unit with an EIA-530A interface.
Frame
Relay
Switch
Router
T1 Host
(Frame Relay
Encapsulated
Data)
99-16150a-01
Router
(Frame Relay
Encapsulated
Data)
EIA-530
Router 1.544 Mb
8784 Termination Unit
in 8600 DSLAM
CO Site
7984
7984
7985
Customer
Premises (CP)
7984 7984
CP
NTU
CO Site
LTU
DSX-1
7984 7985
CP
NTU
CO Site
LTU
EIA-530A
DSX-1
DSX-1
DSX-1
DSX-1
DSX-1
DSX-1
DSX-1
Figure 1-1. Sample M/HDSL Configurations