X-curve, 1 select ‘x-curve’ from the manual sp setup menu, 2 choose the x-curve setting you want – Pioneer VSX-919AH-K User Manual
Page 98: 3 when you’re finished, press return, The other setup menu, 2 select ‘system setup’ from the home menu, 3 select ‘other setup’, then press enter, 4 select the setting you want to adjust, D 98, The system and the other setup 11
The system and the other setup
11
98
En
X-Curve
Most soundtracks mixed for cinema sound too
bright when played back in large rooms. The X-
Curve setting acts as a kind of re-equalization
for home theater listening, and restores proper
tonal balance of movie soundtracks.
1
Select ‘X-Curve’ from the Manual SP
Setup menu.
2
Choose the X-Curve setting you want.
Use
/ to adjust the setting. The X-Curve is
expressed as a downwards slope in decibels
per octave, starting at 2 kHz. The sound
becomes less bright as the slope increases (to
a maximum of
–3.0dB/oct). Use the following
guidelines to set the X-Curve according to your
room size:
• If you select
OFF, the frequency curve will
be flat and the X-Curve has no effect.
3
When you’re finished, press RETURN.
The Other Setup menu
The
Other Setup menu is where you can make
customized settings to reflect how you are
using the receiver.
1
Press
on the remote control,
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
/// and
ENTER to navigate through the screens and
select menu items. Press
RETURN to confirm
and exit the current menu.
2
Select ‘System Setup’ from the HOME
MENU.
3
Select ‘Other Setup’, then press ENTER.
4
Select the setting you want to adjust.
If you are doing this for the first time, you may
want to adjust these settings in order:
•
KURO LINK Setup – Synchronizes this
receiver with your Pioneer component
supporting KURO LINK (see
•
Multi Ch In Setup – Specifies the optional
settings for a multi-channel input (page 99).
•
ZONE Audio Setup – Specifies the volume
setting for a MULTI-ZONE setup (page 99).
•
Power ON Level Setup – Specifies the
volume level set when the power is turned
on (page 100).
•
Volume Limit Setup – Limits the
maximum volume (page 100).
Room size (ft
2
) ≤400 ≤550 ≤650 ≤800 ≤2200 ≤12000
X-Curve
(dB/oct)
–0.5
–1.0
–1.5
–2.0
–2.5
–3.0
4a.Manual SP Setup
A/V RECEIVER
Exit
Return
1. Surr Back System
2. Speaker Setting
3. Channel Level
4. Speaker Distance
5. X-Curve
RECEIVER
A/V RECEIVER
Exit
Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
4.SystemSetup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
1. KURO LINK Setup
4d.Other Setup
A/V RECEIVER
Exit
Return
VSX-1019_KU.book Page 98 Thursday, January 8, 2009 12:01 PM