9 phones jack, 10 listening mode buttons, 11 speakers – Pioneer VSX-919AH-K User Manual
Page 9: 12 multi-zone controls, 13 ipod/iphone/usb, video input terminals, 14 mcacc setup mic jack, Display, 1 signal indicators, 2 program format indicators, 3 digital format indicators

Controls and displays
02
9
En
9
PHONES jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
10 Listening mode buttons
AUTO SURR/ALC/STREAM DIRECT –
Switches between Auto Surround (page 53),
Auto level control mode and Stream Direct
mode (page 56).
STEREO – Switches between stereo
playback, and Front Stage Surround
Advance modes (page 55).
ADVANCED SURROUND – Use to switch
between the various surround modes
(page 54).
STANDARD SURROUND – Press for
Standard decoding and to switch between
the various
2 Pro Logic IIx and Neo:6
options (page 53).
11 SPEAKERS
Use to change the speaker system (page 69).
12 MULTI-ZONE controls
If you’ve made MULTI-ZONE connections (see
MULTI-ZONE setup on page 31) use these
controls to control the sub zone from the main
zone (see
Using the MULTI-ZONE controls on
13 iPod/iPhone/USB, VIDEO INPUT
terminals
Use to connect your Apple iPod as an audio
and video source, or connect a USB device for
audio and photo playback (page 34, 35).
See
Connecting a component to the front panel
14 MCACC SETUP MIC jack
Use to connect the supplied microphone
(page 37).
Display
1
SIGNAL indicators
Light to indicate the currently selected input
signal.
AUTO lights when the receiver is set to
select the input signal automatically (page 58).
2
Program format indicators
Light to indicate the channels being input
when PCM signals are being input. They do not
indicate the audio signals being output from
the receiver.
L/R – Left front/Right front channel
C – Center channel
SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the (( ))
indicators light when an LFE signal is being input)
XL/XR – Two channels other than the ones above
XC – Either one channel other than the ones above,
the mono surround channel or matrix encode flag
3
Digital format indicators
Light when a signal encoded in the corresponding
format is detected.
PCM
HDMI
DIGITAL
ANALOG
L
C
R
SL
SR
XL
XR
XC
LFE
AUTO
DIGITAL PLUS
AUTO SURROUND
STREAM DIRECT
PROLOGIC x Neo:6
ADV.SURROUND
STEREO STANDARD
SP AB SLEEP
DSD PCM
DTS HD ES 96/24
MSTR
S.RTRV SOUND UP MIX OVER MONO
dB
2
MULTI-ZONE
STEREO
TrueHD WMA9Pro
TUNED
PQLS ALC ATT
2
2
USB
VIDEO
TV
DVD
HDMI
DVR
BD
CD
TUNER
SIRIUS
CD-R
iPod
[ 2 ]
[ 3 ]
[ 4 ]
2
1
3
12
8
9 10
7
6
5
13
11
14
15
16
22
23
18
19
20 21
17
10
4
VSX-1019_KU.book Page 9 Thursday, January 8, 2009 12:01 PM