Pioneer VSX-919AH-K - Manual (Page 36)

Basic Setup 04
36
En
Chapter 4:
Basic Setup
Switching the speaker impedance
We recommend using speakers of 8
Ω with this
system, but it is possible to switch the
impedance setting if you plan to use speakers
with a 6
Ω impedance rating.
1 Switch the receiver into standby.
2 While holding down ENTER on the front
panel, press  STANDBY/ON.
The display shows RESET  NO .
Use TUNE +/– (or / on the remote control)
to select SPEAKER  8Ω , and then use
PRESET +/– (or / on the remote control) to
select SPEAKER 8
Ω or SPEAKER 6Ω.
• SPEAKER 8
Ω – Use this setting if your
speakers are rated at 8
Ω or more.
• SPEAKER 6 Ω – Use this setting if your
speakers are rated at 6
Ω.
Changing the OSD display
language (OSD Language)
The language used on the on-screen display
can be changed.
• The explanations in these operating
instructions are for when English is
selected for the OSD.
1 Press on the remote control,
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
/// and
ENTER to navigate through the screens and
select menu items. Press
RETURN to exit the
current menu.
2 Select ‘System Setup’ from the HOME
MENU.
3 Select ‘OSD Language’ from the System
Setup menu.
4 Select the desired language.
• English
• French
• German
• Italian
• Spanish
• Dutch
• Russian
5 Select ‘OK’ to change the language.
The setting is completed and the System Setup
menu reappears automatically.
RECEIVER
A/V RECEIVER
Exit Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
4.SystemSetup
4c.OSD Language
A/V RECEIVER
Exit Return
Language : English
OK
4c.OSD Language
A/V RECEIVER
Exit Return
Language : English
OK
VSX-1019_KU.book Page 36 Thursday, January 8, 2009 12:01 PM