Troubleshooting – Planet Technology WGSD-1020 User Manual

Page 89

Text mode
Original mode

- 85 -

7.TROUBLESHOOTING

This chapter contains information to help you solve problems. If Giga Switch is not functioning properly, make
sure the Ethernet Switch was set up according to instructions in this manual.

The Link LED is not lit

Solution:

Check the cable connection and remove duplex mode of the Giga Switch

Some stations can not talk to other stations located on the other port

Solution:

Please check the VLAN, port trunking and Port Sniffer function which may introduce this kind of problem..

Performance is bad

Solution:

Check the full duplex status of the Ethernet Switch. If the Ethernet Switch is set to full duplex and the
partner is set to half duplex, then the performance will be poor.