Planet Technology WGSD-1020 - Manual (Page 38)

- 34 -
This sub-menu contains four items:
STP Enable: please refer to chapter 4.3.3.1.1
System Configuration: please refer to chapter 4.3.3.1.2
Per port Configuration: please refer to chapter 4.3.3.1.3
Previous Menu: return to previous menu.
4.3.3.1.1 STP Enable
Provide disable or enable STP function
Figure 4-49 STP enable /disable screen
Setup procedure:
1. Press “ Edit” to disable or enable STP function.
2. After setup completed, press ” Ctrl-A” to “Action menu” and choose “save” to save the current
configure. The screen in Figure 4-50 appears.
Figure 4-50 STP enable save successfully screen
3. Press any key for return to the previous menu.