Planet Technology WGSD-1020 - Manual (Page 72)

- 68 -
5.4.7.2 Port VID
In order for an end station send packets to different VLANs. Itself has to be either capable of tagging
packets it sends with VLAN tags or attached to a VLAN-aware bridge that is capable of classifying
and tagging the packet with different VLAN ID based on default PVID and other packet information.
Figure 5-29 WGSD-1020 Port VID setting Web Page screen
Please check the detail description of parameters as below:
1. From the main Tag-based (IEEE 802.1Q) VLAN page, click “Port VID Settings”.
2. Port VID( PVID):
Sets the port VLAN ID that will be assigned to untagged traffic on a given port. For example, if port 10 ’s
default PVID is 100, all untagged packets on port 10 will belong to VLAN 100. The default setting for all
port is VID 1. This feature is useful for accommodating device that you want to participate in the VLAN
does not support VLAN tagging. Only one untagged VLAN is allowed per port.
3. Ingress Filtering:
Ingress filtering lets frames belonging to a specific VLAN to be forwarded if the port belongs to that
VLAN.
Please note there are two ingress filtering rule as follows:
Ingress filtering rule 1: forward only packets with VID matching per port ’s configured VID.
Ingress filtering rule 2: drop untagged frames.
You can click ” Help” button; the following screen in Figure 5-28 appears.
Click “Close” to close this screen.