Planet Technology WGSD-1020 - Manual (Page 64)

- 60 -
Actor: oneself device.
Partner: link partner device.
Admin: Switch default value.
Oper: user setting and aggregating result.
Priority: System priority value.
MAC Address: Switch ’s MAC Address.
Key: aggregating key:
100 serial is LACP static trunking.
60000 serial is LACP dynamic trunking. I.e:101: 100MB group 1
’s LACP static trunking, 102:100MB
Group 2 ’s LACP static trunking. 60010: 10MB LACP dynamic trunking.
Port Priority: always is 1.
Port State:
Active: ON: active status. OFF: passive status.
Timeout: ON: short timeout ( 30 sec.). OFF: long timeout ( 90 sec.).
Aggregation: ON: this link to be aggregating able. OFF: this link to be individual.
SYNC: ON: synchronization status, it has been allocated to the link aggregation information.
OFF: asynchronization status, it ’s not in the correct aggregation.
Collect: ON: enable collection of incoming frames. OFF: disable collection of incoming frames.
Distribute: ON: enable distribution of outgoing frames. OFF: disable distribution of outgoing frames.
Default: ON: in default setting value, using admin configured for the partner. OFF: the operational partner
information for receive in a LACPDU.
Expired: ON: the receive machine is in the expired state. OFF: the receive machine is not in the expired
status.
Speed: display port link speed status.
Full-duplex: display port link duplex status, LACP operation requires full-duplex mode.
LACP enable: display LACP status.
Trunk enable: display local trunk status.
Port enable: display port status.