Removing and replacing the system board, Removing, Replacing – Lenovo THINKCENTRE 8177 User Manual
Page 118: System, Board
5.
Install
the
new
power
supply
and
insert
the
four
screws
that
hold
the
power
supply
in
place.
6.
Reconnect
all
power
supply
cables
to
the
system
board
and
the
drives.
See
7.
Go
to
Removing
and
replacing
the
system
board
1.
Remove
the
cover.
See
2.
Remove
any
PCI
adapters
installed.
See
3.
Carefully
take
note
of
the
location
of
all
cable
connections
on
the
system
board.
It
will
be
necessary
to
reconnect
them
properly
when
installing
a
new
system
board.
See
4.
Disconnect
all
cables
connected
to
the
system
board.
5.
Remove
the
screws
that
secure
the
system
board
in
place
and
remove
the
system
board.
6.
Take
note
of
the
location
of
the
DIMMs
and
remove
them
from
the
failing
system
board
and
install
them
on
the
new
system
board
in
the
same
location
as
they
were
on
the
failing
system
board.
See
7.
Remove
the
heat
sink
and
microprocessor
from
the
failing
system
board
and
install
them
on
the
new
system
board.
See
112
Hardware
Maintenance
Manual