Linksys WRVS4400N - Manual (Page 78)

70 Chapter 6: Setting Up and Configuring the Router
Administration Tab
Wireless-N Gigabit Security Router with VPN
Config Management
Save Configuration
Save Configuration to File button. Click this button to save your Wireless Router’s current configuration to a file
on your PC. Enter the file name on the Windows screen that appears.
Restore Configuration
Select a previously saved configuration file to restore the configuration to the Wireless Router. This could be
helpful if you want to use the same configuration on a new hardware or after resetting to the factory defaults. You
can either enter the file path name yourself or use the Browse button to select a file from the Windows file
system.
Browse button. Click this button to select a previously saved configuration from the Windows file system.
Load button. Click this button to start the restoration process.
Figure 6-54: Trace Route Test Screen
Figure 6-55: Administration - Config
Management