Linksys WRVS4400N - Manual (Page 45)

37 Chapter 6: Setting Up and Configuring the Router
Setup Tab
Wireless-N Gigabit Security Router with VPN
Time
You can either define your Router’s time manually or automatically through Time Server. The default is
Automatically.
Manually
If you wish to enter the time and date manually, select the Date from the drop-down fields and enter the hour,
minutes, and seconds in the Time field using 24 hour format (example 10:00pm would be entered 22:0:0).
Automatically
Time Zone. Select the time zone for your location and your setting synchronizes over the Internet with public NTP
(Network Time Protocol) Servers.
User Defined NTP Server. If you want to use your own NTP server, select the Enabled option. The default is
Disabled.
NTP Server IP Address. Enter the IP address of your own NTP server.
Click the Save Settings button to save the Routing settings, click the Cancel Changes button to undo your
changes or click the Show Routing Table button to view the current routing table.
Figure 6-16: Setup - Time