Linksys WRVS4400N - Manual (Page 110)

102
Wireless-N Gigabit Security Router with VPN
Appendix B: Using the Linksys QuickVPN Software for Windows 2000 or XP
Using the Linksys QuickVPN Software
4. When your QuickVPN connection is established, the status screen will appear, and the QuickVPN tray icon will
turn green. It will display the IP address of the remote end of the VPN tunnel, the time and date the VPN tunnel
began, and the total length of time the VPN tunnel has been active.
To terminate the VPN tunnel, click the Disconnect button. If you want to change your password, click the
Change Password button. For information, click the Help button.
5. If you clicked the Change Password button and have permission to change your own password, you will see
the Connect Virtual Private Connection screen. Enter your password in the Old Password field. Enter your new
password in the New Password field. Then enter the new password again in the Confirm New Password field.
Click the OK button to save your new password. Click the Cancel button to cancel your change. For
information, click the Help button.
Figure B-11: QuickVPN Software - Change Password
Figure B-9: QuickVPN Tray
Icon - Connection
Figure B-8: QuickVPN Software - Status
Figure B-10: QuickVPN Tray
Icon - No Connection