Linksys WRVS4400N - Manual (Page 26)

18 Chapter 5: Connecting the Router
Placement Options
Wireless-N Gigabit Security Router with VPN
Placement Options
There are three ways to place the Wireless-N Router. The first way is to place it horizontally on a surface, so it sits
on its four rubber feet. The second way is to stand the Wireless Router vertically on a surface. The third way is to
mount it on a wall. The stand and wall-mount options are explained in further detail below.
Stand Option
1. Locate the Router’s left side panel.
2. The Router includes two stands. With the two large prongs facing outward, insert the short prongs into the
little slots in the Router, and push the stand upward until it snaps into place.
Repeat this step with the other stand.
Now that the hardware installation is complete, proceed to “Chapter 6: Setting up and Configuring the
Wireless-N Router,” for directions on how to set up the Wireless-N Router."
Figure 5-6: Stand
Large
Prongs
Figure 5-5: The Stand Option