Linksys WRVS4400N - Manual (Page 71)

63 Chapter 6: Setting Up and Configuring the Router
VPN Tab
Wireless-N Gigabit Security Router with VPN
VPN Client Accounts
You can allow remote users to easily establish a VPN connection to your Router using the Linksys QuickVPN client
utility without using a compatible VPN Router with IPsec VPN settings. This is achieved by creating user accounts
on the Router and authenticate users through Username and Password. After creating user accounts, it will be
summarized in the table below.
For users using QuickVPN, it will first establish an SSL connection with remote Wireless Router to get
authenticated. Then QuickVPN will automatically negotiate IPsec settings with the remote Router. All the data
packets will be encrypted using IPsec thereafter.
The Wireless Router supports up to five Linksys QuickVPN clients by default. Additional QuickVPN Client licenses
can be purchased separately.
Username. Enter the username using any combination of keyboard characters.
Password. Enter the password you would like to assign to this user.
Re-enter to Confirm. Retype the password to ensure that it has been entered correctly.
Allow User to Change Password. This option determines whether the user is allowed to change their password.
VPN Client List Table
No. Displays the user number.
Active. When checked, the designated user can connect, otherwise the VPN client account is disabled.
Username. Displays the username.
Edit button. This button is used to modify the username, password, or toggle between whether the user is
allowed to change their password.
Remove button. This button is used to delete a user account.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click
More for additional details.
Figure 6-45: VPN - VPN Client Accounts