Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 39)

Configuring a 20 Series CellPipe
Configuring the dnsrelay command
CellPipe™ 20 Series User’s Guide 4-13
Select the setwanip command to set PVC and the IP address for routing.
>r1483> setwanip [/] ]>
Select the show command to display the RFC1483 configuration.
> r1483> show
RFC1483 setting:
FUNCTION VPI/VCI CLASS Wan IP/MaskNum
Configuring the dnsrelay command
The following is a list of menus available under the dnsrelay command:
setdnsip - set DNS Server IP
show - show DNS Relay configuration
Select the setdnsip command to set the IP address of the DNS server.
>dnsrelay> setdnsip []
Select the show command to display the DNS Relay configuration.
>dnsrelay> show
DNS server ip: 192.168.2.65
Retry times: 3
DNS relay status
Configuring the ipoa command
The following is a list of menus available under the ipoa command>
delwanip - delete IPoA PVC
setqos - set class
setrip - set IPoA PVC
setwanip - set IPoA PVC
show - show IPoA configuration
Select the delwanip command to delete one or all (8) IPoA PVCs.
>ipoa> delpvc |[/]