Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 24)

Command-Line Interface
Routing commands
3-8 CellPipe™ 20 Series User’s Guide
ipoa delwanip - delete IPoA PVC
setqos - set class
setrip - set IPoA PVC
setwanip - set IPoA PVC
show - show IPoA configuration
lan dhcpclient - set dhcp client configuration
dhcpserver - set dhcp server configuration
fullduplex - fullduplex |
setdhcp - set dhcp operation
setip - setup the IP address, and subnet mask for
Ethernet connection
show - show LAN configuration
pat addpatin - add incoming PAT table
delpatin - delete incoming PAT table
setpat - enable or disable PAT function
show - show PAT configuration
pppoa adduser - add user ID and password
chpass - change user password
deluser - delete user
echo - set echo interval time
setllc - add LLC header on the packets
setqos - set class
show - show PPPoA configuration
r1483 delwanip - delete VPI and VCI
setqos - set class
setwanip - set PVC and Wan IP for routing mode
show - show RFC1483 configuration
Table 3-2. Additional main-menu and second-level routing commands (continued)
Main menu Second-level menus/description