Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 34)

Configuring a 20 Series CellPipe
Configuring LAN interface
4-8 CellPipe™ 20 Series User’s Guide
fullduplex - fullduplex |
setip - setup the IP address, and subnet mask for
Ethernet connection
show - show LAN configuration
Select the fullduplex command to enable or disable fullduplex.
>lan> fullduplex |
Select the setip command to set up the IP address and subnet mask for the LAN
link. For example:
>lan> setip 192.168.2.32
Set a new IP address = 192.168.2.32 and
Subnet mask is default = 255.255.255.0
Select the show command to display the current configuration of IP setting. For
example:
>lan> show
Ethernet IP = 192.168.2.32 and
Subnet mask is default = 255.255.255.0
FullDuplex : Disable
Configuring LAN interface in routing mode
The following is a list of the menus available under the lan command in routing
mode:
dhcpclient - set dhcp client configuration
dhcpserver - set dhcp server configuration
fullduplex - fullduplex |
setdhcp - set dhcp operation
setip - setup the IP address, and subnet mask for
Ethernet connection
show - show LAN configuration
Select the dhcpclient command to set up the dhcp client configuration.
>lan> dhcpclient