Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 22)

Command-Line Interface
Routing commands
3-6 CellPipe™ 20 Series User’s Guide
Routing commands
You have to preselect for routing mode to have the routing commands display.
To select for routing, enter the mode command and then enter r to select routing.
>>mode
Please select bridge or router:(b/r,b)r
r1483 (for adsl) delpvc - delete VPI and VCI
pfilter - set packet filter type
setpvc - set VPI and VCI for bridge mode
setqos - set class
setspan - | spanning tree
show - show RFC1483 configuration
r1483 (for sdsl) delwanip - delete VPI and VCI
setqos - set class
setwanip - set PVC and Wan IP for routing mode
show - show RFC1483 configuration
restart reboot modem
save save and restart modem
show display configuration of PVC and Ethernet
ver display software version
Table 3-1. Main menu and second-level bridging commands (continued)
Main menu Second-level menus/description