Returning to the main menu, Displaying second-level commands, Saving configurations – Lucent Technologies CELLPIPE 7820-0766-004 User Manual
Page 19: Bridging commands, Bridging commands -3

Command-Line Interface
Bridging commands
CellPipe™ 20 Series User’s Guide
3-3
Returning to the main menu
To return to the main commands, enter the
home
command:
>
lan> home
Displaying second-level commands
To select a second-level command, enter the command at the > prompt:
>adsl> show
Saving configurations
To save a value or configuration, enter the
save
command and type
y
:
>> save
Are you sure that you want to save the new changes?(y/n)y
Note:
All settings have to be saved to take effect.
Bridging commands
The default main menu list of commands is for bridging. To display a list of bridging
commands, enter the
help
command.
>> help
The following main menu commands are displayed for bridging mode:
xdsl*
- entry to xdsl menu
default
- set all configuration to factory setting
lan
- entry to Ethernet
list
- list status for enabled PVC
manage
- entry to management menu
mode
- exit this menu and change modem mode
ping
- ping IP for testing purpose
quick
- quick setup
r1483
- entry to RFC 1483 menu
restart
- reboot modem