Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 36)

Configuring a 20 Series CellPipe
Configuring the quick command
4-10 CellPipe™ 20 Series User’s Guide
>>mode
Please select bridge or router:(b/r,r) <b|r>
Configuring the quick command
The quick command allows you to easily configure your LAN connections in either
the bridging or routing mode.
The quick command in bridging mode
The quick command in bridging mode allows you to easily configure eight PVCs.
For example:
>> quick
1 PVC existed, 7 PVCs available.
VPI(0-1023):8
VCI (0-65535):33
Packet Filter (Any/Ip/Pppoe): any
Add another PVC ? (y/n): n
Enable Spanning tree? (y/n) : y
The quick command in routing mode
The quick command in routing mode allows you to select the connection protocol
and set up the appropriate PVCs. For example:
>> quick
R1483(r)/ IPoA(i)/ PPPoA(p): r1483
0 PVC existed, 8 PVCs available.
Ethernet IP (149.198.65.46) :
Subnet mask (255.255.255.0) :
VPI(0-1023): 5
VCI(1-65535): 32
WAN IP : 149.198.6.46
Add another PVC ? (y/n): n