Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 37)

Configuring a 20 Series CellPipe
Configuring the r1483 command
CellPipe™ 20 Series User’s Guide 4-11
>>quick
R1483(r)/ IPoA(i)/ PPPoA(p): ipoa
0 PVC existed, 8 PVCs available.
Ethernet IP (149.198.65.46) :
Subnet mask (255.255.255.0) :
VPI(0-1023): 5
VCI(1-65535): 33
WAN IP : 148.198.6.46
Gateway : 148.198.6.90
>>quick
R1483(r)/ IPoA(i)/ PPPoA(p): pppoa
0 PVC existed, 1 PVC available.
Ethernet IP (149.198.65.46) :
Subnet mask (255.255.255.0) :
VPI(0-1023): 5
VCI(1-65535): 34
Authentication( PAP(p)/CHAP(c)/None(n) ): p
User name: Lucent
Password: *******
Retype password: *******
Configuring the r1483 command
You can configure the r1483 command for either bridging or routing mode.
The r1483 command in bridging mode
The following is a list of menus under the r1483 command in the bridging mode:
delpvc - delete VPI and VCI
pfilter - set packet filter type
setpvc - set VPI and VCI for bridge mode
setqos - set class