Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 38)

Configuring a 20 Series CellPipe
Configuring the r1483 command
4-12 CellPipe™ 20 Series User’s Guide
setspan - | spanning tree
show - show RFC1483 configuration
Select the delpvc command to delete one or all PVCs.
>r1483> delpvc |[/]
Select the pfilter command to set the packet filter type.
>r1483> pfilter [/]
Select the setpvc command to set the PVCs in bridging mode.
>r1483> setpvc [/] [llc/vcmux]
Select the setqos command to set the class for quality of service.
>r1483> setqos [/]
Select the show command to display the RFC1483 configuration.
FUNCTION VPI/VCI CLASS LLC/VCMUX Spanning Pkt Filter
Rfc1483 8/35 ubr LLC Enable ANY
The r1483 command in routing mode
The following is a list of menus under the r1483 command in the routing mode:
delwanip - delete VPI and VCI
setqos - set class
setrip - set RIP configuration
setwanip - set PVC and Wan IP for routing mode
show - show RFC1483 configuration
Select the delwanip command to delete one or all PVCs.
>r1483> delpvc |[/]
Select the setqos command to set the class for quality of service.
>r1483> setqos [/]
Select the setrip command to set the PVC for RIP.
>ipoa> setrip [/] <1|2|1&2|0>