Navigate to cursor position on map – Lowrance electronic 5300c User Manual

Page 56

Navigate to Cursor Position on Map

The

URSOR

command: navigates to the current cursor position on

the map. It's a quick and handy way to navigate to anything you can

see on the map display.
1. Use the cursor (controlled by the arrow keys) with the zoom in and

zoom out keys to maneuver around the map until you find a location

you want to go to.
2. Center the cursor over the location to select it. See the example in

the following figure. (Many map items such as waypoints, Points of In-

terest, towns, etc. can be "selected," and appear "highlighted" with a

pop-up box. Other features, such as a river or a street intersection will

not appear "highlighted," but the cursor will take you to those locations

just the same.)

Navigate to cursor. In this example, the cursor is centered on Oologah,

Oklahoma.

3. Press

MENU

ENT

and the unit will begin navigating to the cursor

location.

The Map Page will display a dotted line from your current position to the

cursor position. The Navigation Page displays a compass rose showing

navigation information to your destination. See the following examples.