beautypg.com

Lowrance electronic 5300c User Manual

Page 146

background image

138

To select Fluid Type:

1. Press

MENU| MENU

, use

↑ ↓ to select

NMEA

2000

and press

ENT

. The

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.
2. Highlight

B

US

S

ETUP

and press

ENT

, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press

ENT

. The Fluid Level Device

Configuration menu will appear.
4. Press

↓ to

F

LUID

T

YPE

and press

ENT

, which will open the Fluid Type

menu with the following options: Fuel, Water, Gray Water, Live Well,

Oil, Black Water and Unknown.
5. Select the desired fluid type and press

ENT

. The following message

will appear: Are you sure you wish to change this device's configuration?
6. Highlight

Y

ES

and press

ENT

. Press

EXIT

repeatedly to get back to the

main display.

To input Tank Size:

1. Press

MENU| MENU

, use

↑ ↓ to select

NMEA

2000

and press

ENT

. The

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.
2. Highlight

B

US

S

ETUP

and press

ENT

, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press

ENT

. The Fluid Level Device

Configuration menu will appear.
4. Highlight

T

ANK

S

IZE

and press

ENT

. Use

↑ ↓ ,← → to input the size of

the tank and press Enter. The following message will appear: Are you
sure you wish to change this device's configuration?
5. Select

Y

ES

and press

ENT

. Press

EXIT

repeatedly to get back to the

main display.
Advanced Options menu
The Fuel Flow sensor Advanced Options menu contains two categories:

Instance and Restore Defaults.

Instance

The Instance command is intended for use only by experienced NMEA

2000 network technicians. Instance allows network technicians to re-

solve certain electronic probe conflicts. This is most likely to occur if the

network includes LMF-200 or LMF-400 digital gauges, which support

the display of fewer electronic probes than your GPS or sonar/GPS unit.

www.Busse-Yachtshop.de email: [email protected]