Lexmark 4I3 User Manual

Page 118

Using the Printer Verification Test for the F3 Forms
Device

To run the printer verification test, follow these steps:

1. Turn the power On (|), if not already on.

2. Wait until the printer displays

3. Press Stop.

The printer displays

and then on Models 102, 1I1, and 4I3 you may see

or on Models 202, 2I1, and 5I3 you may see

While on Models 4I3 and 5I3 (when parallel or serial is the
active interface) you may see

Ignore these messages until you have attached the printer to
your computer. (Press Stop to turn off the alarm, if necessary.)

4. Press Test.

READY

This manual is related to the following products: