Lowrance electronic Handheld Mapping GPS Receiver User Manual
Page 42
34
1. Use the cursor (controlled by the arrow keys) with the zoom in and
zoom out keys to maneuver around the map until you find a location
you want to go to.
2. Center the cursor over the location to select it. See the example be-
low. (Many map items such as waypoints, Points of Interest, towns, etc.
can be "selected," and appear "highlighted" with a pop-up box. Other
features, such as a river or a street intersection will not appear "high-
lighted," but the cursor will take you to those locations just the same.)
Navigate to cursor. In this example, the cursor has selected the town of
Oologah, Oklahoma.
3. Press
MENU
|
ENT
and iFINDER will begin navigating to the cursor
location.
The Map Page will display a dotted line from your current position to
the cursor position. The Navigation Page displays a compass rose
showing navigation information to your destination. See the following
examples.
The 15-mile zoom figure at left clearly shows the dotted course line
connecting your current position to your destination. The 60-mile
zoom, center, shows both current position and destination on screen.
The Navigation Page, right, will also show navigation information.