How ifinder works – Lowrance electronic Handheld Mapping GPS Receiver User Manual
Page 12
4
Custom mapping: .......... Accepts custom, higher-detail MapCreate
6
mapping on memory cards, with searchable
Points-of Interest database of hotels, restau-
rants, shopping, services, hunting areas and
more. Navionics
charts on MMC cards op-
tional.
Mapping memory: ......... Up to 512 MB on one MMC (MultiMedia
Card) or SD (Secure Digital Card.)
Position updates: .......... Every one second.
Position points: ............. 2,000 waypoints; 1,000 event marker icons.
Graphic symbols for
waypoints or event
marker icons: ................. 42.
Routes:............................. 100; up to 100 waypoints per route.
Plot Trails: ...................... 99 savable; up to 9,999 points per trail.
Scout Plots:..................... 100 savable scout plots.
Man Overboard:............. MOB feature precisely marks man overboard
location with special icon, then automatically
displays navigation data to that position.
Audible alarms: ............. Arrival/off-course/destination passed/anchor.
Com Port: ........................ One serial communications port, NMEA 0183
version 2.0 compatible. Allows exchange of
position data with another device, such as an
autopilot or personal computer. Optional
combination serial/power cable available.
Zoom range:.................... 40 ranges; 0.02 to 4,000 miles.
NOTE:
The above memory capacities refer only to iFINDER's on-board
memory. The amount of GPS data you can record and save for re-
call later is only limited by the number of MMC cards you have.
How iFINDER Works
You'll navigate faster and easier if you understand how iFINDER scans
the sky to tell you where you are on the earth — and, where you're go-
ing. (But if you already have a working understanding of GPS receivers
and the GPS navigation system, skip on ahead to Section 2, Installation
& Accessories on page 11. If you're new to GPS, read on, and you can
later impress your friends with your new-found knowledge.)