Lowrance electronic Handheld Mapping GPS Receiver - Manual (Page 25)

17
signals. Your unit will automatically switch between the active RAA-3
and its internal antenna (located in the top of the case). If you purchase
the passive FA-8, you must use a menu check box to manually switch
between it and the internal antenna. See the topic "External Passive
Antenna" in Sec. 5.
Attach iFINDER antenna to windshield bracket with two screws.
You may achieve good results by simply placing the external antenna
on the top of the dash, at the base of the windshield. A piece of the rub-
ber non-skid shelf liner material available in recreational vehicle sup-
ply stores will also help hold the antenna in place.
To use the antenna: Mount it in a location with an unobstructed view of
the sky. Plug the connector into the unit's antenna socket, located on
the back, in the upper left corner of the case.
R-A-M

Bracket Mounting Systems
Several R-A-M

mounting brackets are available for your iFINDER.
There are permanent mounts and temporary mounts suitable for virtu-
ally any boat, aircraft or other vehicle, even motorcycle handlebars.
Two R-A-M mounting systems for your unit.