Lowrance electronic Handheld Mapping GPS Receiver - Manual (Page 28)

20
6. EXIT – The Exit key lets you return to the previous screen, clear
data or erase a menu.
7. FIND – The Find key launches the iFINDER search menus and
some navigation functions.
8. ZOUT – (Zoom Out) – This key lets you zoom the screen out to see a
larger geographic are on the map. Less detail is seen as you zoom out.
9. ZIN – (Zoom In) – This key lets you zoom the screen in to see greater
detail in a smaller geographic area on the map.
Power/lights on and off
To turn on the unit, press PWR . To turn on the backlight, press PWR
again. Pressing PWR once again will turn off the backlight. (Press EXIT
to clear any message or alarm displays.)
Turn off the unit by pressing and holding the PWR key for 3 seconds.
Main Menu
Easy Mode has a single Main Menu, which contains some function com-
mands and some setup option commands. The tutorial lessons in this sec-
tion will deal only with functions, the basic commands that make
iFINDER do something. iFINDER will work fine for these lessons right out
of the box with the factory default settings. But, if you want to learn about
the various options, see Sec. 5, System Setup and GPS Setup Options.
Main Menu, Easy Mode.
The Main Menu commands and their functions are:
Go To Cursor command: navigates to the current cursor position on
the map
Cancel Navigation command: turns off the navigation command after
you have reached the end of a back trail or your destination waypoint,
Point of Interest or map cursor location.