Lifescan In Duo - Manual (Page 7)

GETTING YOUR InDuo™ SYSTEM READY FOR USE
7
Setting the time format
• Press ˛ and the 12-hour format Ä will start
flashing.
• Your InDuo™ meter can display the time in either
a 12-hour format ¸ or a 24-hour format | to
‹.
• The 12-hour format is pre-set in the meter.
• If you wish to display the time in 24-hour format,
press and release Ñ. Pressing Ñ again will return
you to the 12-hour format.
Setting the year
Before setting the date you must first set the time.
Your InDuo™ meter displays the date as mm/dd.
• With the preferred time format on the display,
press ˛ and the year digits will start flashing.
• Press and release Ñ until the correct year is
displayed.
• To scroll faster, hold Ñ down.
DCO_06153701A_ID_OB_CAN 9/6/02 11:36 AM Page 7