Lifescan In Duo - Manual (Page 10)

10
GETTING YOUR InDuo™ SYSTEM READY FOR USE
æ OneTouch ® Ultra Test Strips
Your InDuo™ meter is designed for use only with
OneTouch
® Ultra Test Strips.
• Store the OneTouch ® Ultra Test Strip package in a
cool, dry place below 30°C (86ºF). Keep away from
direct sunlight and heat. Do not refrigerate.
• Store your OneTouch ® Ultra Test Strips in their
original vial only; do not transfer them to a new
bottle or any other container.
• After removing a OneTouch ® Ultra Test Strip from
the vial, immediately replace the vial cap and close
it tightly.
• With clean, dry hands, you may touch the test
strip anywhere on its surface when removing it
from the vial or inserting it into the meter.
• Use each OneTouch ® Ultra Test Strip immediately
after removing it from the vial.
• Write the discard date on the vial label when you
open it for the first time. Discard remaining
OneTouch
® Ultra Test Strips and the vial 3 months
after the vial was first opened.
Contact bars
Insert this end of
OneTouch
® Ultra
Test Strip into the
InDuo™ meter.
Top edge
Apply a sample here,
where the narrow
channel meets the
top edge of
OneTouch
® Ultra
Test Strip.
Confirmation
window
This is where you
confirm if a large
enough sample
has been applied
to the top edge.
DCO_06153701A_ID_OB_CAN 9/6/02 11:36 AM Page 10