Lifescan In Duo - Manual (Page 63)

CARING FOR YOUR InDuo™ SYSTEM
63
How to replace the InDuo™ meter battery
• To replace the meter battery, make sure that the
InDuo™ meter is turned off.
• Turn your InDuo™ meter over and locate the
battery compartment.
• Open the battery door on the back of the meter a.
• Remove the old battery. Insert one 3.0 V (#2032 or
equivalent) lithium battery, making sure the
positive ( + ) side of the battery is facing up b.
• Slide the battery door closed.
• Replacing the meter battery does not affect test
results already stored in the InDuo™ meter
memory. However, the time, date and unit of
measurement settings may need to be updated.
• After replacing the battery, turn the meter on by
inserting a test strip or pressing the ˛ button.
If the meter is in setting mode, confirm that the
time, time format, date, and most importantly, the
unit of measurement are set correctly. If they are
not, use the ˛ and Ñ buttons to reset the meter
before testing. See setting the meter, page 5.
a
b
DCO_06153701A_ID_OB_CAN 9/6/02 11:36 AM Page 63