LSI MegaRAID Enterprise 1600 - Manual (Page 30)

MegaRAID Enterprise 1600 Hardware Guide 16
Selecting a RAID Level
The factors you need to consider when selecting a RAID level are listed below.
Level Description and
Use
Pros Cons Maximum
Physical
Drives
Fault
Tolerant
0 Data divided in
blocks and
distributed
sequentially (pure
striping). Use for
non-critical data
that requires high
performance. High data
throughput
for large
files No fault
tolerance. All
data lost if
any drive
fails. One to 32 No
1 Data duplicated on
another disk
(mirroring). Use
for read-intensive
fault-tolerant
systems 100% data
redundancy Doubles disk
space.
Reduced
performance
during
rebuilds. Two Yes
3 Disk striping with a
dedicated parity
drive. Use for non-
interactive apps
that process large
files sequentially. Achieves
data
redundancy
at low cost Performance
not as good as
RAID 1 Three to 32 Yes
5 Disk striping and
parity data across
all drives. Use for
high read volume
but low write
volume, such as
transaction
processing. Achieves
data
redundancy
at low cost Performance
not as good as
RAID 1 Three to 32 Yes
10 Data striping and
mirrored drives. High data
transfers,
complete
redundancy More
complicated Four to 32
(must be a
multiple of
two)
Yes
30 Disk striping with a
dedicated parity
drive. High data
transfers,
redundancy More
complicated Six to 32 Yes
50 Disk striping and
parity data across
all drives. High data
transfers,
redundancy More
complicated Six to 32 Yes