LSI MegaRAID Enterprise 1600 - Manual (Page 112)

MegaRAID Enterprise 1600 Hardware Guide 98
Configuring Cluster Disks, Continued
Use the following procedure to configure the clustered disks.
Step Description
1 The Add or Remove Managed Disks dialog box specifies disks on the shared SCSI bus
that will be used by Cluster Service. Add or remove disks as necessary, then click on
Next.
2 The following screen displays. Click on Next in the Configure Cluster Networks dialog
box.
3 Verify that the network name and IP address correspond to the network interface for the