Kodak Ektapro Slide Projector 4020 User Manual
Kodak Projectors
This manual is related to the following products:
Table of contents
Document Outline
- Library
- Manual Contents
- Kodak EKTAPRO Slide Projector Service Manual
- TABLE OF CONTENTS
- 1. GENERAL INFORMATION 1-3
- 2. INTRODUCTION 2-1
- 3. THEORY GUIDE 3-1
- 4. DISASSEMBLY/ASSEMBLY 4-1
- UPPER HOUSING 4-1
- BUTTONS and COVER PLATES 4-2
- CENTER HOUSING 4-4
- FAN, KEYBOARD PCB and TRAY MOTION PCB 4-8
- BACK PANEL PCB 4-10
- TRANSFORMER, POWER SUPPLY PCB and BACK PLATE ASSEMBLY 4-11
- MECHANISM FRAME and LENS MOUNT 4-12
- LENS MOUNT 4-13
- RETAINER AF ASSEMBLY 4-16
- MECHANISM FRAME 4-18
- AUTO FOCUS PCB and FOCUS MOTOR 4-21
- Master Board PCB 4-22
- LOWER HOUSING 4-25
- DUAL LAMP MODULE 4-26
- Lubrication 4-30
- 5. DIAGNOSTICS 5-1
- Diagnostic Overview EKTAPRO 4020/5020/7020/9020 and 9020/CINE 5-1
- Preparation 5-3
- No Function 5-4
- Switch on Procedure Problems 5-9
- Lamp Problems EP 4020/5020/7020/9020 and 9020/CINE 5-12
- Mirror Position 5-17
- Switch On Procedure 5-18
- Switch On Procedure complete - No Keyboard Function 5-19
- No function with REMOTE CONTROL 5-20
- Cable Remote 5-23
- No Slide Transport forward/reverse and other projection problems 5-24
- Shutter Problems 5-35
- Fan Problems 5-27
- Slide Obstruction in Slide Tray 5-29
- Wrong Transport Step by 80/140 SLIDE TRAY 5-30
- No Focus Actuation 5-32
- No Standby Function 5-33
- Communication Trouble 4010/5010/9010 5-35
- AUTO FOCUS 5020/9020 and 9020/CINE: No AUTO FOCUS Function 5-39
- Accessory Slot 7020/9020 5-40
- 6. Projector Checking 6-1
- 7. MAINTENANCE 7-1