Kodak Ektapro Slide Projector 4020 - Manual (Page 11)

1. GENERAL INFORMATION
Service Tools
Use the following tools to repair a KODAK EKTAPRO Slide Projector:
TORX Screw Driver size 206
TORX Screw Driver size 210
TORX Screw Driver size 215 or TORX bits TL-3255
TORX Screw Driver size 220
Logic Probe TTL/CMOS
Oscilloscope - only for checks on the AUTO FOCUS PCB.
Digital Multimeter Voltage 5 to 240 V AC
0 to 50 V DC
Current 1 to 100 mA DC Accuracy: 1%
0,1 to 2 A DC
0,1 to 5 A AC
The multimeter should have RMS capability
Accuracy 1%
Fixture Tool 622 0454
For Models 4020/5020/7020/9020/9020/CINE
PLCC Extractor Tool TL-4430
Service Computer 100% IBM compatible
Hard disk
CGA/EGA/VGA Monitor/Display
1 RS 232 Serial Interface
1 Centronics Printer Interface
1 720kB Floppy Disk Drive
1 9pin Serial Interface CORD
Diagnostic Software: TL-4575
Ejector Microcontroller G 990 3250
SM 2547-1 Service Manual
Kodak AG, Stuttgart 1-3 03/98