Kodak Ektapro Slide Projector 4020 - Manual (Page 82)

MICROCONTROLLER
1 . Remove the UPPER HOUSING. See page 4-1.
2 . Remove the CENTER HOUSING. See page 4-4.
3 . Remove the SCREW and the COVER.
4 . Use a PLCC EXTRACTOR TOOL (TL 4430) to remove the MICROCONTROLLER from the
MASTER PCB.
5 . When assembling note the beveled edge of the MICROCONTROLLER and the PLCC/PIN-GRID
SOCKET. Install these edges together.
NOTE
The MICROCONTROLLER is installed in a PLCC-Socket.
MICROCONTROLLER
SCREW
PLCC EXTRACTOR
TOOL (TL 4430)
COVER
Service Manual SM2547-1
03/98 4-24 Kodak AG, Stuttgart