Kenwood TM-V71E - Manual (Page 83)

75
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
When using the optional VGS-1 voice guide & storage unit, you gain access to the
voice recorder and voice announcement functions.
Note: The VGS-1 is sold depending upon area.
VOICE ANNOUNCEmENTS
When changing modes, frequencies, settings, etc., an audio voice will announce the
new information.
1 Enter Menu mode and access Menu 003 (ANN) {page 20}.
2 Set the announcement function to MANUAL, AUTO, or OFF.
• Refer to the tables below for announcements based on settings.
MANUAL:
A microphone PF key must be programmed as [VOICE] to use MANUAL voice
announcment.
Operation Announcement
While in VFO mode
Press [VOICE]:
Operating band frequency
While in MR mode
Press [VOICE]:
“Channel” + Channel number + operating band
frequency
While in Call mode
Press [VOICE]:
“Call channel” + operating band frequency
While in Menu mode
Press [VOICE]:
Menu number or setting value (some selections
have no voice announcement)
Tone frequency setup
Press [VOICE]:
“Tone frequency” + frequency value
CTCSS frequency setup
Press [VOICE]:
“CTCSS frequency” + frequency value
DCS code setup
Press [VOICE]:
“DCS” + code value