Kenwood TM-V71E - Manual (Page 64)

56
AUTOMATIC DIALER
There are 10 dedicated DTMF Memory channels available to store DTMF codes.
You can store up to 16 digits in each channel.
n Storing a DTMF Code in Memory
1 Enter Menu mode and access Menu 301 (DT.MEM) {page 20}.
2 Rotate the Tuning control to select a channel number.
3 Press the Tuning control to set the selected channel number.
• The name entry display appears.
4 Enter a name for the channel {page 24}, the press the Tuning control to set
it.
• The code entry display appears.
5 Enter a DTMF code for the channel {page 24}, then press the Tuning
control to set it.