Print spotted, Print too dark, Print too light – Kodak 5300 User Manual

Page 88: Printing stops

Chapter 8

Load only one type of paper.

Print spotted

Paper may be dirty.

Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the paper tray and
load new paper.

NOTE: Keep paper tray covers closed to keep dust and debris from collecting on the paper or inside the

printer.

Print too dark

Try re-taking the picture with the flash on or move within the flash range of the camera. See your

camera user guide for details.

Adjust the exposure compensation on your camera and try re-taking the picture. See your camera user

guide for details.

Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help

for details.

Make sure the printer is not placed in direct sunlight or is not operating in a high-temperature

environment.

Print too light

IMPORTANT: For best results, use only Kodak ink cartridges and paper for your printer.

Make sure the paper is loaded with the Kodak logo facing up. Reload if necessary.

Try re-taking the picture with the flash off. See your camera user guide for details.

Adjust the exposure compensation on your camera and try re-taking the picture. See your camera user

guide for details.

Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help

for details.

Printing stops

Printing stops mid-print. Paper stops feeding and Status light may blink.

IMPORTANT: For best results, use only Kodak ink cartridges and paper for your printer.

Kodak EasyShare 5300 AiO