Kodak 5300 - Manual (Page 8)

Chapter 1
Power light on power lead
Light status Cause Action/Solution
The printer to power supply lead
is not properly connected to the
power supply. Reseat the printer to power
supply lead.
The power supply to your wall
outlet lead is not properly
connected to your wall outlet. Reseat the power supply to your
wall outlet lead.
You do not have the appropriate
power available at your wall
outlet. Test your wall outlet by plugging
a known working device into
your wall outlet. Have your wall
outlet checked by a qualified
electrician.
Power lead light is off.
There may be an issue with the
power supply. Visit Kodak.com for additional
troubleshooting steps or contact
your local Kodak call centre.
Power lead light is on. The power lead and power
supply are properly connected
and ready to supply power to the
printer. Ensure that the power lead is
properly plugged into the back of
the printer.
4 Kodak EasyShare 5300 AiO