Kodak 5300 - Manual (Page 76)

Chapter 7
Printhead
The printhead dispenses the ink from the ink cartridges onto the paper. Printer maintenance involves:
Calibration
Clean the printhead
Calibration
T he Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However,
you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads
and performs a nozzle health check to enable high-quality prints.
To calibrate from computer
1 Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly
recommended for calibrations.
2 Start the AiO Home Centre.
3 Click to open the Help panel.
4 Under General Links, click Maintenance.
5 Click Calibration to make a calibration print.
6 Follow the instructions on the calibration print to calibrate the printer.
To calibrate from control panel
1 Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly
recommended for calibrations.
2 Press Menu .
3 Press
b
until Calibrate Printer is selected.
4 Press OK. A new screen appears with Print Calibration Page selected.
5 Press Start and follow the instructions on the LCD screen to complete the calibration.
Clean Printhead
If you notice degradation in the quality of prints, the printhead may need cleaning.
To clean printhead from computer
1 Start the AiO Home Centre.
2 Click to open the Help panel.
3 Under General Links, click Maintenance.
4 Click Printhead Cleaning.
72 Kodak EasyShare 5300 AiO