Kodak 5300 - Manual (Page 25)

Getting started
4 Press
b
until Add Date to Prints is selected.
5 Press
_
or
`
to enable or disable date printing.
6 Press OK.
Button Sounds
You can configure your EasyShare AiO to emit an audio feedback beep when you press a button on the
control panel. The default setting is to beep.
1 Press Menu to display the main menu.
2 Press
b
until Control Panel Settings is selected.
3 Press OK.
4 Press
_
or
`
to enable or disable button sounds.
5 Press OK.
Minutes to standby
When the Kodak EasyShare All-in-One is idle for the standby power setting timeout period, it enters the
Standby state. The On/Off indicator remains lit, but power consumption is reduced. When in the Standby
state, any activity such as a single button press or inserting a memory card brings the EasyShare AiO out
of the Standby state and returns it to the Ready state.
You can set the standby timeout from 10 – 30 minutes. The default setting is 30 minutes.
1 Press Menu to display the main menu.
2 Press
b
until Control Panel Settings is selected.
3 Press OK. The Power Settings menu is displayed with Minutes to Standby selected.
4 Press
_
or
`
to change the standby timeout period.
5 Press OK.
User’s Guide 21