Kodak 5300 - Manual (Page 68)

Chapter 6
Scan to application
The Home Centre software enables you to maintain a list of scan destination applications.
1 Place a photo or photos face down on the scanner glass.
2 Press Scan to display the Scan menu.
3 Press
_
or
`
to select Photo.
4 Press
b
to select Scan To.
5 Press
`
to select Application.
6 Press
b
to until Application is selected.
7 Press
_
or
`
to select another application.
8 Press Start.
Scan to memory card
1 Insert a memory card into the appropriate card slot.
WARNING
Never attempt to remove a memory card while it is being accessed. Doing so may damage
files on the card. You can safely remove a card only when the status light next to the slots
is not blinking.
2 Place a photo or photos face down on the scanner glass.
3 Press Scan to display the Scan menu.
4 Press
_
or
`
to select Photo.
5 Press
b
to select Scan To.
6 Press
_
or
`
to select Memory Card.
7 Press Start.
Scanning documents
With the control panel Scan menu, you can scan documents to a file, application or memory card.
Scan to file
1 Load your original face down on the front right-hand corner of the scanner glass.
64 Kodak EasyShare 5300 AiO