Kenwood MDX-G1 - Manual (Page 59)

59 EN
Knowledge
section
BLANK DISC = No MD data is recorded.
BUFFER OVER = An attempt is made to perform high-speed recording of more than
81 tracks within 74 minutes.
CAN'T EDIT = An attempt is made to edit a track which is too short.
CD LID OPEN = The CD door is open.
CD NO DISC = An CD is not inserted.
DISC ERROR = The contents of UTOC* are abnormal. In this case, perform “ALL
ERASE” operation (page 43). If this is not possible, use another
disc.
DISC FULL = There is no recordable area on the disc or an attempt is made to
record a 256th track. In this case, use another recordable disc.
Note that more than 255 tracks cannot be recorded on a disc.
FULL = An attempt is made to select a 33rd track when setting the Q.ERASE
or Q.MOVE operation.
MD NO DISC = An MD is not inserted.
MD READING = The TOC* information in the disc is being read.
MD WRITING = The data related to editing or recording is being written in the disc.
NO TRACKS = The MD disc does not contain any track but has a disc title.
PGM FULL = An attempt is made to select a 33rd track when programming CD
or MD tracks.
PLAY ONLY = The inserted MD is a playback only disc. Insert a recordable MD.
PROTECTED = The inserted MD is write-protected. In this case, enable the
recording. (page 54)
SCMS = An attempt is made to record digital signal from a source while its
digital copy has been prohibited by SCMS.
TITLE FULL = An attempt is made to assign a title with more characters than
usable.
* All minidiscs contain a Table of Contents (TOC) in addition to sound signals. The TOC is similar to
the table of contents in a book and contains information, such as track numbers, track length, and
character information, that cannot be rewritten.
In addition to the TOC, minidiscs also contain a special User’s Table of Contents (UTOC) that con-
tains track number, track length, and character information, that can be rewritten.
Display message list
*5053/52-64/EN 5/29/01, 11:02 AM 59